AstroCube
- Suitable for indoor application to bring in clean fresh air from outdoor
- Reduce indoor CO2 level
- Improve indoor air quality
- 3 stage filtration with H14 HEPA filter
- Optional heat recovery feature to reduce the heat from outdoor and reduce stress – A/C system
- Easy installation & maintenance
- Remote control through mobile app
- Create a positive pressure environment
- Act as a indoor circulation purifier when fresh air is not needed
INDUSTRIES
Typical applications
Commercial Buildings
Residential
Nursery
Food & Beverage
Office
Schools and Universities
Prayer Areas and Salons

Recent studies suggest that proper ventilation, with the correct supply of fresh air in a room can help reduce the risk of SARS-Cov-2. According to SHRAE, “Ventilation and filtration provided by heating, ventilating, and air-conditioning systems can reduce the airborne concentration of SARS-CoV-2 and thus the risk of transmission through the air. Unconditioned spaces can cause thermal stress to people that may be directly life-threaten- ing and that may also lower resistance to infection. In general, disabling of heating, ventilating, and air-conditioning systems is not a recommended measure to reduce the transmission of the virus.”
Healthy Air Solution
Reduces high carbon dioxide concentration in the room by the positive pressure that flushes out dust and dirty air through the cracks in the window or door. At the same time, this blocks outdoor PM2.5 and other pollutants from entering the room.
Sleek Air Filtration
Each cube is designed for optimum air filtration efficiency, with options to achieve normal to very high air filtration operation depending on the environment.
Smart Application
AstroCube has a built-in Smart Air App feature that can remotely monitor the air quality in a room where it’s installed.
| Air Flow | 500 CMH |
| Noise Level | ≤ 53 dB(A) |
| Application Area | 50 – 150 m2 |
| Power Supply | 1Ph/50Hz/220V |
| Power Input | 310 W |
| Fan Power Input | 210 W |
| Exhaust Fan Power Input | 90 W |
| Dimension (H x W x D) | 1900 x 500 x 350 mm |
| Heat Recovery Efficiency | 65% |
or
Enquire Now
Related products
AstroSafe® G-Series Single Filter Housings
- Allows a single filter element (prefilter, HEPA filter or gas adsorber) to be installed in a low CFM ventilation system
- Designed so that housing can be tested in place
- Accommodates various arrangements of inlet and outlet ports
- Filter-to-housing fluid seal is created by means of a continuous knife edge in the housing
